10 Common Air Conditioning Problems You Should Know About

Kahl AC, Heating & Refrigeration Inc. > Blog > 10 Common Air Conditioning Problems You Should Know About

10 Common Air Conditioning Problems You Should Know About

The summer season has arrived, and it’s time for the air conditioners to perform their annual magic. Air conditioners, which had fallen out of favor in recent months, are once again the talk of the town, and air conditioner problems cannot be tolerated! Some reliable air conditioning, such as AC Installation Magnolia, keep you up to date on maintenance issues, but you should also keep an eye on things on your own. This allows you to detect potential problems before you need AC Replacement Magnolia TX in the future.

The following are the most common AC-related issues

  • Your air conditioner is not turning on

If your AC fails to function, check the thermostat.
If the batteries are dead, replace them. Check the thermostat settings to see if the cooling mode is on with your selected temperature settings and if the batteries are in good working order.

  • Filter

A clogged or dirty filter is a common cause of air conditioners not working properly. Replace your air filter as specified by the manufacturer.

  • Drainage issue

Drainage issues caused by dirt and algae are common that obstruct the function of your AC. To avoid this, clean your drainage pipe regularly.

  • Failure of electric control

The fan controls and compressor can wear out if you regularly turn on and off your air conditioner. Your air conditioner’s fan controls and compressor can wear out if it is regularly turned on and off. The condenser fan motor, compressor, and blower motor set an electrical connection between them to start the unit. Your air conditioner may fail to operate due to interference in the electric connection.

  • Fuses or breakers

The primary function of fuses and breakers are to protect the compressor and air conditioner motor from overheating. When a motor fails, a breaker is one of the first things an HVAC professional looks for.

  • Wear and tear

From compressor to condenser fan, they operate through electricity. If there are any inner issues or damage with the wire, you may find it difficult to start your air conditioner if this component is damaged.

  • Compressor

The compressor helps transmit energy between the refrigerant and propels through the coils in exchange for heat.
If the compressor fails, the air conditioner will not cool your home. If there is insufficient refrigerant, the compressor will overheat and eventually seize.

  • Fan-related issue

Fans help to flow air through the system and are an important air conditioner feature. Reduced airflow, lower efficiency, and even compressor failure can be caused by a malfunctioning motor, degraded lubrication, wear and tear damage, and dirt.

  • Capacitors

Without capacitors, the compressor and fan motors will not function. The beginning capacitor sends a jolt to stimulate the motor, while the run capacitor sends a series of jolts to keep it running. If either of these components fails, the air conditioner will not work properly.

  • Sensor Issues

A thermostat sensor located behind the control panel measures the air temperature entering the evaporator coil in room air conditioners. The air conditioner may cycle incessantly or behave erratically if the sensor is displaced.

Conclusion

These are some of the most common AC issues homeowners may encounter before or during peak air conditioner usage. You should address these issues as soon as possible to avoid larger air conditioner problems or hire a professional AC Replacement in Magnolia, TX.